manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 630 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 630

Lean NOx Trap (if equipped)

The Lean NOx Trap (LNT) system
removes the nitrogen oxide in the
exhaust gas. The smell can occur in
the exhaust gas depending on the
quality of the fuel and it can degrade
NOx reduction performance, please
use the regulated automotive diesel
fuel

CAUTION

- Diesel Fuel 

(if equipped with DPF)

It is recommended to use the
regulated automotive diesel fuel
for diesel vehicle equipped with
the DPF system.
If you use diesel fuel including
high sulfur (more than 50 ppm
sulfur) and unspecified addi-
tives, it can cause the DPF sys-
tem to be damaged and white
smoke can be emitted.

7 108

Maintenance

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments