manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 610 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 610

Maintenance

88

7

(1) Tail stop lamp or stop lamp
(2) Tail lamp
(3) Back-up lamp
(4) Rear turn signal lamp
(5) Rear fog lamp (if equipped)
(6) Tail stop lamp or stop lamp (LED)

If the light (LED) does not operate,
we recommend that you checked an
authorised Kia dealer.

Outside lamp

• 4 Door, 2Door
1. Turn off the engine.
2. Open the trunk lid.
3. Remove the service cover by

pulling out the service cover.

• 5 Door
1. Turn off the engine.
2. Open the tailgate.
3. Loosen the light assembly retaining

screws with a cross-tip screwdriver.

4. Remove the rear combination light

assembly from the body of the
vehicle.

OYDDMC2029

■

4 Door, 2 Door

OYDDMC3064

■

5 Door

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments