manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 603 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 603

7 81

Maintenance

4. Remove the bulb-socket from the

housing by turning the socket
counter clockwise until the tabs on
the socket align with the slots on
the housing.

5. Install the new bulb-socket into the

housing by aligning the tabs on
the socket with the slots in the
housing. Push the socket into the
housing and turn the socket clock-
wise.

6. Connect the power connector to

the socket.

Front fog light aiming

The front fog lamp can be aimed as
the same manner of the head lamps
aiming.

With the front fog lamps and battery
normal condition, aim the front fog
lamps. To aim the front fog lamp up
or down, turn the driver clockwise or
counterclockwise.

OYD076004L

OYD074022

■

4 Door, 5 Door

■

2 Door

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments