manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 582 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 582

Maintenance

60

7

Inner panel fuse replacement

1. Turn the ignition switch and all

other switches off.

2. Open the fuse panel cover.

3. Pull the suspected fuse straight

out. Use the removal tool provided
in the main fuse box in the engine
compartment.

4. Check the removed fuse; replace it

if it is blown.

5. Push in a new fuse of the same

rating, and make sure it fits tightly
in the clips.

If it fits loosely, we recommend that
you consult an authorised Kia dealer.

If you do not have a spare, use a
fuse of the same rating from a circuit
you may not need for operating the
vehicle, such as the cigarette lighter
fuse.
If the headlights or other electrical
components do not work and the
fuses are OK, check the fuse panel
in the engine compartment. If a fuse
is blown, it must be replaced.

OYDEMC2009R

OYDEMC2010R

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments