manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 58 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 58

Safety features of your vehicle

40

3

Place the child restraint system in
the seat and route the lap/shoul-
der belt around or through the
child restraint system, following
the child restraint system manu-
facturer’s instructions. Be sure the
seat belt webbing is not twisted.

2. Fasten the lap/shoulder belt latch

into the buckle. Listen for the dis-
tinct “click” sound.

Position the release button so that it
is easy to access in case of an emer-
gency.

3. Buckle the seat belt and allow the

seat belt to take up any slack. After
installation of the child restraint
system, try to move it in all direc-
tions to be sure the child restraint
system is securely installed.

OEN036104

OEN036101

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments