manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 569 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 569

7 47

Maintenance

CAUTION

• Underinflation also results in

excessive wear, poor handling
and reduced fuel economy.
Wheel deformation also is
possible. Keep your tyre pres-
sures at the proper levels. If a
tyre frequently needs refilling,
we recommend that the sys-
tem be checked by an autho-
rised Kia dealer.

• Overinflation produces a

harsh ride, excessive wear at
the centre of the tyre tread,
and a greater possibility of
damage from road hazards.

WARNING 

- 

Tyre Inflation

Overinflation or underinflation
can reduce tyre life, adversely
affect vehicle handling, and
lead to sudden tyre failure. This
could result in loss of vehicle
control and potential injury.

CAUTION - 

Tyre pressure

Always observe the following:
• Check tyre pressure when the

tyres are cold. (After vehicle
has been parked for at least
three hours or hasn't been
driven more than 1.6 km (one
mile) since startup.)

• Check the pressure of your

spare tyre each time you
check the pressure of other
tyres.

• Never overload your vehicle.

Be careful not to overload a
vehicle luggage rack if your
vehicle is equipped with one.

• Worn, old tyres can cause

accidents. If your tread is
badly worn, or if your tyres
have been damaged, replace
them.

CAUTION

• Warm tyres normally exceed

recommended cold tyre pres-
sures by 28 to 41 kPa (4 to 6
psi). Do not release air from
warm tyres to adjust the pres-
sure or the tyres will be under-
inflated.

• Be sure to reinstall the tyre

inflation valve caps. Without
the valve cap, dirt or moisture
could get into the valve core
and cause air leakage. If a
valve cap is missing, install a
new one as soon as possible.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments