manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 567 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 567

7 45

Maintenance

Reset items

Items should be reset after the bat-
tery has been discharged or the bat-
tery has been disconnected.
• Auto up/down window 

(See chapter 4)

• Sunroof (See chapter 4)
• Trip computer (See chapter 4)
• Climate control system 

(See chapter 4)

• Clock (See chapter 4)
• Audio (See chapter 4)

(Continued)
• Watch the battery during

charging, and stop or reduce
the charging rate if the battery
cells begin gassing (boiling)
violently or if the temperature
of the electrolyte of any cell
exceeds 49°C (120°F).

• Wear eye protection when

checking the battery during
charging.

• Disconnect the battery charg-

er in the following order.
1. Turn off the battery charger

main switch.

2. Unhook the negative clamp

from the negative battery ter-
minal.

3. Unhook the positive clamp

from the positive battery ter-
minal.

WARNING

• Before performing mainte-

nance or recharging the bat-
tery, turn off all accessories
and stop the engine.

• The negative battery cable

must be removed first and
installed last when the battery
is disconnected.

• We recommend that the sys-

tem be serviced by an autho-
rised Kia dealer.

CAUTION

• Keep the battery away from

water or any liquid.

• We recommend that you use

parts for replacement from an
authorised Kia dealer.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments