manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 561 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 561

7 39

Maintenance

WIPER BLADES 

Blade inspection

✽

✽

NOTICE

Commercial hot waxes applied by
automatic car washes have been
known to make the windscreen diffi-
cult to clean. 

Contamination of either the wind-
screen or the wiper blades with for-
eign matter can reduce the effective-
ness of the windscreen wipers.
Common sources of contamination
are insects, tree sap, and hot wax
treatments used by some commer-
cial car washes. If the blades are not
wiping properly, clean both the win-
dow and the blades with a good
cleaner or mild detergent, and rinse
thoroughly with clean water.

Blade replacement 

When the wipers no longer clean
adequately, the blades may be worn
or cracked, and require replacement.

1JBA5122

CAUTION

To prevent damage to the wiper
blades, do not use petrol,
kerosene, paint thinner, or other
solvents on or near them.

CAUTION

To prevent damage to the wiper
arms or other components, do
not attempt to move the wipers
manually.

CAUTION

The use of a non-specified
wiper blade could result in
wiper malfunction and failure.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments