manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 557 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 557

7 35

Maintenance

AIR CLEANER

Filter replacement 

It must be replaced when necessary,
and should not be washed.
You can clean the filter when inspect-
ing the air cleaner element.
Clean the filter by using compressed
air.

1. Loosen the air cleaner cover

attaching clips and open the cover.

2. Wipe the inside of the air cleaner.
3. Replace the air cleaner filter.
4. Lock the cover with the cover

attaching clips.

OMD070010

OMD070011

OMD070012

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments