manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 555 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 555

7 33

Maintenance

WASHER FLUID

Checking the washer fluid
level 

The reservoir is translucent so that
you can check the level with a quick
visual inspection.
Check the fluid level in the washer
fluid reservoir and add fluid if neces-
sary. Plain water may be used if
washer fluid is not available.
However, use washer solvent with
antifreeze characteristics in cold cli-
mates to prevent freezing.

Checking the parking brake

Check the stroke of the parking
brake by counting the number of
“clicks’’ heard whilst fully applying it
from the released position. Also, the
parking brake alone should securely
hold the vehicle on a fairly steep
grade. If the stroke is more or less
than specified, we recommend that
the system be serviced by an autho-
rised Kia dealer.

Stroke : 6~8 “clicks’’ at a force of 

20 kg (44 lbs, 196 N).

WARNING -

Coolant

• Do not use radiator coolant or

antifreeze in the washer fluid
reservoir.

• Radiator coolant can severely

obscure visibility when
sprayed on the windscreen
and may cause loss of vehicle
control or damage to paint
and body trim.

• Windscreen Washer  fluid

agents contain some amounts
of alcohol and can be flamma-
ble under certain circum-
stances. Do not allow sparks
or flame to contact the washer
fluid or the washer fluid reser-
voir. Damage to the vehicle or
occupants could occur.

• Windscreen washer fluid is

poisonous to humans and
animals. Do not drink and
avoid contacting windscreen
washer fluid. Serious injury or
death could occur.

OMD070007

OYD056037L/H

PARKING BRAKE 

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments