manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 551 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 551

7 29

Maintenance

Check the condition and connections
of all cooling system hoses and
heater hoses. Replace any swollen
or deteriorated hoses.
The coolant level should be filled
between F and L marks on the side
of the coolant reservoir when the
engine is cool.
If the coolant level is low, add enough
distilled (deionized) water to provide
protection against freezing and cor-
rosion. Bring the level to F, but do not
overfill. If frequent additions are
required, we recommend that the
system be inspected by an autho-
rised Kia dealer.

WARNING

The electric motor
(cooling fan) is con-
trolled by engine
coolant temperature,
refrigerant pressure

and vehicle speed. It may some-
times operate even when the
engine is not running. Use
extreme caution when working
near the blades of the cooling fan
so that you are not injured by a
rotating fan blades. As the
engine coolant temperature
decreases, the electric motor will
automatically shut off.
This is a normal condition.

■

Petrol 1.6L MPI

■

Petrol 2.0L MPI

OYD076025L

■

Petrol 1.6L T-GDI

OYD076042

OYDEMC2055

■

Diesel 1.6L TCI

OYD076015

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments