manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 547 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 547

7 25

Maintenance

If it is near or at L, add enough oil to
bring the level to F. Do not overfill.

Use a funnel to help prevent oil
from being spilled on engine com-
ponents.

Use only the specified engine oil.
(Refer to “Recommended lubricants
and capacities” in chapter 8.)

Changing the engine oil and
filter

We recommend that the engine oil
and filter be replaced by an autho-
rised Kia dealer.

WARNING

Used engine oil may cause skin
irritation or cancer if left in con-
tact with the skin for prolonged
periods of time. Used engine oil
contains chemicals that have
caused cancer in laboratory
animals. Always protect your
skin by washing your hands
thoroughly with soap and warm
water as soon as possible after
handling used oil.

CAUTION

Do not overfill the engine oil. It
may damage the engine.

■

Petrol 1.6L MPI

■

Petrol 2.0L MPI

OYD076023R

■

Petrol 1.6L T-GDI

OYD076039R

OYD076036R

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments