manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 528 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 528

Maintenance

6

7

(Continued)

If you lack sufficient knowl-
edge and experience or the
proper tools and equipment to
do the work, we recommend
that the system be serviced by
an authorised Kia dealer.

• Working under the bonnet with

the engine running is danger-
ous. It becomes even more
dangerous when you wear jew-
elry or loose clothing. These
can become entangled in mov-
ing parts and result in injury.
Therefore, if you must run the
engine whilst working under
the bonnet, make certain that
you remove all jewelry (espe-
cially rings, bracelets, watches,
and necklaces) and all neck-
ties, scarves, and similar loose
clothing before getting near the
engine or cooling fans.

• Do not leave gloves, rags or

any other combustible materi-
al in the engine compartment.
Doing so may cause a heat-
induced fire.

(Continued)
• When you remove the interior

trim cover with a flat bed (-)
driver, be careful not to dam-
age the cover.

• Be careful when you replace

and clean bulbs to avoid
burns or electrical shock.

CAUTION

• Do not put heavy objects or

apply excessive force on top
of the engine cover (if
equipped) or fuel related parts.

• When you inspect the fuel

system (fuel lines and fuel
injection devices), we recom-
mend that you contact an
authorised Kia dealer.

• Do not drive long time with the

engine cover (if equipped)
removed.

• When checking the engine

room, do not go near fire. Fuel,
washer fluid, etc. are flamma-
ble oils that may cause fire.

• Before touching the battery,

ignition cables and electrical
wiring, you should disconnect
the battery "-" terminal. You
may get an electric shock
from the electric current.

(Continued)

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments