manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 521 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 521

What to do in an emergency

26

6

• Use a towing strap less than 5 m

(16 feet) long. Attach a white or red
cloth (about 30 cm (12 inches)
wide) in the middle of the strap for
easy visibility.

• Drive carefully so that the towing

strap is not loosened during towing.

Emergency towing precautions

• Turn the ignition switch to ACC so

the steering wheel isn’t locked.

• Place the transaxle shift lever in N

(Neutral).

• Release the parking bake.
• Press the brake pedal with more

force than normal since you will
have reduced brake performance.

• More steering effort will be

required because the power steer-
ing system will be disabled.

• If you are driving down a long hill,

the brakes may overheat and brake
performance will be reduced. Stop
often and let the brakes cool off.

OYF062017

OYF069017

CAUTION 

- Automatic transaxle / 

Dual clutch transmission

• If the car is being towed with all

four wheels on the ground, it
can be towed only from the
front. Be sure that the transaxle
is in neutral. Be sure the steer-
ing is unlocked by placing the
ignition switch in the ACC posi-
tion. A driver must be in the
towed vehicle to operate the
steering and brakes.

• To avoid serious damage to

the automatic transaxle / dual
clutch transmission, limit the
vehicle speed to 15 km/h (10
mph) and  drive less than 1.5
km (1 mile) when towing.

• Before towing, check the auto-

matic transaxle / dual clutch
transmission for fluid leaks
under your vehicle. If the auto-
matic transaxle / dual clutch
transmission fluid is leaking,
flatbed equipment or a towing
dolly must be used.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments