manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 514 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 514

6 19

What to do in an emergency

To prevent the jack, jack handle,
wheel lug nut wrench and spare tyre
from rattling whilst the vehicle is in
motion, store them properly.

Important - use of compact spare
tyre (if equipped)

Your vehicle is equipped with a com-
pact spare tyre. This compact spare
tyre takes up less space than a reg-
ular-size tyre. This tyre is smaller
than a conventional tyre and is
designed for temporary use only.

The compact spare should be inflat-
ed to 420 kPa (60 psi).

✽

✽

NOTICE

Check the inflation pressure after
installing the spare tyre. Adjust it to
the specified pressure, as necessary.

CAUTION

• You should drive carefully

when the compact spare is in
use.

The compact spare

should be replaced by the
proper conventional tyre and
rim at the first opportunity.

• The operation of this vehicle

is not recommended with
more than one compact spare
tyre in use at the same time.

WARNING

The compact spare tyre is for
emergency use only. Do not
operate your vehicle on this
compact spare at the speed
over 80 km/h (50 mph). The orig-
inal tyre should be repaired or
replaced as soon as possible to
avoid failure of the spare possi-
bly leading to personal injury or
death.

WARNING

- Wheel studs

If the studs are damaged, they
may lose their ability to retain
the wheel. This could lead to the
loss of the wheel and a collision
resulting in serious injuries.

WARNING 

- Inadequate

spare tyre pressure

Check the inflation pressures
as soon as possible after
installing the spare tyre. Adjust
it to the specified pressure, if
necessary. Refer to “Tyres and
wheels” in chapter 8.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments