manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 507 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 507

What to do in an emergency

12

6

You may not be able identify a low
tyre by simply looking at it. Always
use a good quality tyre pressure
gauge to measure the tyre's inflation
pressure. Please note that a tyre that
is hot (from being driven) will have a
higher pressure measurement than a
tyre that is cold (from sitting station-
ary for at least 3 hours and driven
less than 1 mile (1.6 km) during that
3 hour period).
Allow the tyre to cool before measur-
ing the inflation pressure. Always be
sure the tyre is cold before inflating
to the recommended pressure.
A cold tyre means the vehicle has
been sitting for 3 hours and driven for
less than 1 mile (1.6 km) in that 3
hour period.

WARNING - 

Protecting
TPMS

Tampering with, modifying, or
disabling the Tyre Pressure
Monitoring System (TPMS) com-
ponents may interfere with the
system's ability to warn the driv-
er of low tyre pressure condi-
tions and/or TPMS malfunctions.
Tampering with, modifying, or
disabling the Tyre Pressure
Monitoring System (TPMS) com-
ponents may void the warranty
for that portion of the vehicle.

WARNING - 

TPMS

• The TPMS cannot alert you to

severe and sudden tyre dam-
age caused by external factors
such as nails or road debris.

• If you feel any vehicle instabil-

ity, immediately take your foot
off the accelerator, apply the
brakes gradually and with
light force, and slowly move to
a safe position off the road.

WARNING 

- 

For EUROPE

• Do not modify the vehicle, it

may interfere with the TPMS
function.

• The wheels on the market do

not have a TPMS sensor.
For your safety, we recom-
mend that you use parts for
replacement from an autho-
rised Kia dealer.

• If you use the wheels on the

market, use a TPMS sensor
approved by a Kia dealer.
If your vehicle is not equipped
with a TPMS sensor or TPMS
does not work properly, you
may fail the periodic vehicle
inspection conducted in your
country.

❈

❈

All vehicles sold in the
EUROPE market during
below period must be
equipped with TPMS.

- New model vehicle :

Nov. 1, 2012 ~

- Current model vehicle :

Nov. 1, 2014~ (Based on vehi-
cle registrations)

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments