manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 505 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 505

What to do in an emergency

10

6

TPMS (Tyre Pressure
Monitoring System)
malfunction indicator

The TPMS malfunction indicator will
illuminate after it blinks for approxi-
mately one minute when there is a
problem with the Tyre Pressure
Monitoring System. If the system is
able to correctly detect an under
inflation warning at the same time as
system failure then it will illuminate
the TPMS malfunction indicator.
We recommend that the system be
checked by an authorised Kia dealer
as soon as possible to determine the
cause of the problem.

WARNING - 

Low pres-
sure damage

Significantly low tyre pressure
makes the vehicle unstable and
can contribute to loss of vehicle
control and increased braking
distances.
Continued driving on low pres-
sure tyres can cause the tyres
to overheat and fail.

CAUTION

• The TPMS malfunction indica-

tor may be illuminated if the
vehicle is moving around elec-
tric power supply cables or
radios transmitter such as at
police stations, government
and public offices, broadcast-
ing stations, military installa-
tions, airports, or transmitting
towers, etc. This can interfere
with normal operation of the
Tyre Pressure Monitoring
System (TPMS).

• The TPMS malfunction indica-

tor may illuminate if snow
chains or some separately
purchased devices such as
notebook computers, mobile
charger, remote starter, navi-
gation etc. are used in the
vehicle. This can interfere with
normal operation of the Tyre
Pressure Monitoring System
(TPMS).

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments