manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 502 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 502

6 7

What to do in an emergency

IF THE ENGINE OVERHEATS

If your temperature gauge indicates
overheating, you will experience a
loss of power, or hear loud pinging or
knocking, the engine is probably too
hot. If this happens, you should:

1. Pull off the road and stop as soon

as it is safe to do so.

2. Place the shift lever in P (automat-

ic transaxle / dual clutch transmis-
sion) or neutral (manual transaxle)
and set the parking brake. If the air
conditioning  is on, turn it off.

3. If engine coolant is running out

under the vehicle or  steam is com-
ing out from the bonnet, stop the
engine. Do not open the bonnet until
the coolant has stopped running or
the steaming has stopped. If there is
no visible loss of engine coolant and
no steam, leave the engine running
and check to be sure the engine
cooling fan is operating. If the fan is
not running, turn the engine off.

4. Check to see if the water pump

drive belt is missing. If it is not miss-
ing, check to see that it is tight.

If the drive belt seems to be  sat-
isfactory, check for coolant leaking
from the radiator, hoses or under
the vehicle. (If the air conditioning
had been in use, it is normal for
cold water to be draining from it
when you stop).

5. If the water pump drive belt is bro-

ken or engine coolant is leaking
out, stop the engine immediately
and we recommend that you call
an authorised Kia dealer.

6. If you cannot find the cause of the

overheating, wait until the engine
temperature has returned to nor-
mal. Then, if coolant has been lost,
carefully add coolant to the reser-
voir to bring the fluid level in the
reservoir up to the halfway mark.

7. Proceed with caution, keeping

alert for  further signs of overheat-
ing. If overheating happens again,
we recommend that you call an
authorised Kia dealer.

CAUTION

• Serious loss of coolant indi-

cates there is a leak in the cool-
ing system and we recommend
that the system be checked by
an authorised Kia dealer.

• When the engine overheats

from low engine coolant, sud-
denly adding engine coolant
may cause cracks in the
engine. To prevent damage,
add engine coolant slowly in
small quantities.

WARNING

Whilst the engine is running,
keep hair, hands and clothing
away from moving parts such
as the fan and drive belts to pre-
vent injury.

WARNING

Do not remove the radiator cap
when the engine is hot. This can
allow coolant to blow out of the
opening and cause serious
burns.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments