manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 500 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 500

6 5

What to do in an emergency

EMERGENCY STARTING

Connect cables in numerical order
and disconnect in reverse order.

Jump starting  

Jump starting can be dangerous if
done incorrectly. Therefore, to avoid
harm to yourself or damage to your
vehicle or battery, follow the jump
starting procedures. If in doubt, we
strongly recommend that you have a
competent technician or towing serv-
ice jump start your vehicle.

CAUTION

Use only a 12-volt jumper sys-
tem. You can damage a 12-volt
starting motor, ignition system,
and other electrical parts
beyond repair by use of a 24-
volt power supply (either two
12-volt batteries in series or a
24-volt motor generator set).

WARNING

- Battery

• Keep all flames or sparks

away from the battery. The
battery produces hydrogen
gas which may explode if
exposed to flame or sparks.
If these instructions are not fol-
lowed exactly, serious personal
injury and damage to the vehi-
cle may occur! If you are not
sure how to follow this proce-
dure, seek qualified assis-
tance. Automobile batteries
contain sulfuric acid. This is
poisonous and highly corro-
sive. When jump starting, wear
protective glasses and be care-
ful not to get acid on yourself,
your clothing or on the vehicle.

• Do not attempt to jump start

the vehicle if the discharged
battery is frozen or if the elec-
trolyte level is low; the battery
may rupture or explode.

• Do not allow the (+) and (-)

jumper cables to touch. It may
cause sparks.

• The battery may rupture or

explode when you jump start
with a low or frozen battery.

WARNING

- Battery

Never attempt to check the elec-
trolyte level of the battery as
this may cause the battery to
rupture or explode causing seri-
ous injury.

1VQA4001

Discharged

battery

Jumper Cables

Booster
battery

(-)

(+)

(+)

(-)

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments