manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 491 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 491

5 95

Driving your vehicle

If you do decide to pull a trailer

Here are some important points if
you decide to pull a trailer:
• Consider using a sway control. You

can ask a hitch dealer about sway
control.

• Do not do any towing with your car

during its first 2,000 km (1,200
miles) in order to allow the engine
to properly break in. Failure to heed
this caution may result in serious
engine or transaxle damage.

• When towing a trailer, we recom-

mend that you consult an authorised
Kia dealer on additional require-
ments such as a towing kit, etc.

• Always drive your vehicle at a mod-

erate speed (less than 100 km/h
(60 mph)).

• On a long uphill grade, do not

exceed 70 km/h (45 mph) or the
posted towing speed limit, whichev-
er is lower.

• The chart contains important con-

siderations that have to do with
weight:

For Australia

M/T : Manual transaxle

A/T : Automatic transaxle

DCT : Dual clutch transmission

❈

2 Door vehicle is not applied to trailer towing.

ITEM

4 Door

5 Door

M/T 

A/T

M/T 

A/T

Maximum trailer
weight 

kg (Ibs.)

Without brake

System

610 

(1,345)

610 

(1,345)

610 

(1,345)

610 

(1,345)

With brake

System

1200 

(2,646)

1100 

(2,425)

1200 

(2,646)

1100 

(2,425)

Maximum 
permissible static vertical load on
the coupling device

kg (Ibs.)

75 (165)

Recommended distance from rear
wheel centre to coupling point

mm (inch)

1,105 (43.5)

895 (35.2)

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments