manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 469 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 469

5 73

Driving your vehicle

The Forward Collision Warning
System helps avoid accidents by
identifying critical situations early
and warning the driver.

FCWS Operation

To operate:

Go to the User Settings Mode
(Driving Assist) and select FCW
(Forward Collision Warning) on the
LCD display (For more details, refer
to "LCD Display" in chapter 4.).
The system will turn on and standby
to activate. The system will activate
when vehicle speed is above 15
km/h (9 mph) and below 180 km/h
(112 mph).
FCWS will default ON when vehicle
is restarted even though FCWS was
turned off on User Settings Mode.

Warning message

A warning message "Foward warn-
ing" and chime will be provided when
rapidly approaching a slower moving,
braking or stopped vehicle ahead.
Immediately reduce your speed to
prevent a collision.

FORWARD COLLISION WARNING SYSTEM (FCWS) (IF EQUIPPED)

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments