manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 461 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 461

5 65

Driving your vehicle

• Check BSD System
If the system does not work properly,
this warning message will appear and
the light on the switch will turn off. The
system will turn off automatically.

We recommend you to have the sys-
tem checked by an authorised Kia
dealer.

RCTA (Rear cross traffic alert)

When your vehicle moves backwards
from a parking position, the sensor
detects approaching vehicles to the
left or right side direction and gives
information to the driver.

Operating conditions

• To activate the RCTA (Rear Cross

Traffic Alert), 
(1) Change the LCD modes to

User setting mode

(2) Select the Driving Assist 
(3) Check the Smart Trunk.
For more details, refer to "LCD
Windows" in chapter 4.

• Select RCTA again, to turn the sys-

tem off.

• If the vehicle is turned off and on

again, the RCTA system will return
to the state right before the vehicle
was turned off. Turn the RCTA sys-
tem off when not in use.

OYD056047L

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments