manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 458 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 458

Driving your vehicle

62

5

BSD (Blind Spot Detection) /
LCA (Lane Change Assist)

Operating conditions

The indicator on the switch will illumi-
nate when the BSD (Blind spot detec-
tion) / LCA (Lane Change Assist) sys-
tem switch is pressed with the ignition
switch ON. If the vehicle speed
exceeds 30 km/h (18.6 mph), the sys-
tem will activate.
If you press the switch again, the
switch indicator and system will be
turned off.
If the ignition switch is turned OFF
and ON the system returns to the
previous state.

When the system is not used turn the
system off by pressing the switch.
When the system is turned on the
warning light will illuminate for 3 sec-
onds on the outside rearview mirror.

Warning type

The system will activate when:
1. The system is on 
2. Vehicle speed is above 30 km/h

(18.6 mph)

3. Other vehicles are detected in the

rear side

OYD056061R

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments