manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 457 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 457

5 61

Driving your vehicle

The BSD (Blind spot detection) sys-
tem uses a radar sensor to alert the
driver whilst driving.
It senses the rear side territory of the
vehicle and provides information to
the driver.

➀

BSD(Blind spot detection)

Warning range is dependent on your
vehicle speed. However, if the speed
of your vehicle is faster by 10km/h or
more than other nearby vehicles, the
warning is not operated.

➁

LCA(Lane change assist)

When vehicles are approaching to
your vehicle at high speed, the warn-
ing is operated.

➂

RCTA(Rear cross traffic alert)

When your vehicle moves backward,
the sensor detects approaching vehi-
cles to the left or right side direction
and warning is operated.

BLIND SPOT DETECTION SYSTEM (BSD) (IF EQUIPPED)

OUM056176L

WARNING  

• Always check the road condi-

tion whilst driving for unex-
pected situations even though
the BSD (Blind spot detection)
system is operating.

• BSD (Blind spot detection)

system is a system made for
convenience. Do not solely
rely on the system but always
pay attention to drive safely.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments