manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 454 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 454

Driving your vehicle

58

5

To resume cruising speed at
more than approximately 30
km/h (20 mph):

If any method other than the
CRUISE button was used to cancel
cruising speed and the system is still
activated, the most recent set speed
will automatically resume when you
move the lever up (to RES+).
It will not resume, however, if the
vehicle speed has dropped below
approximately 30 km/h (20 mph).

✽

✽

NOTICE

Always check the road conditions
when you move the lever up (to
RES+) to resume the speed.

To turn cruise control off, do
one of the following:

• Press the CRUISE button. (the

CRUISE indicator light in the
instrument cluster will go off)

• Turn the ignition off.

Both of these actions cancel cruise
control operation. If you want to
resume cruise control operation,
repeat the steps provided in “To set
cruise control speed” on the previous
page.

OYDDDR3024

OYDDDR3022

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments