manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 453 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 453

5 57

Driving your vehicle

To temporarily accelerate with
the cruise control on:

If you want to speed up temporarily
when the cruise control is on,
depress the accelerator pedal.
Increased speed will not interfere
with cruise control operation or
change the set speed.
To return to the set speed, take your
foot off the accelerator pedal.
If you move the down (to SET-) at
increased speed, the cruising speed
will be set again.

To cancel cruise control, do
one of the following:

• Depress the brake pedal.
• Depress the clutch pedal with a

manual transaxle.

• Shift into N (Neutral) with an auto-

matic transaxle / dual clutch trans-
mission.

• Press the CANCEL switch located

on the steering wheel.

• Decrease the vehicle speed lower

than the memory speed by 20
km/h (12 mph).

• Decrease the vehicle speed to less

than approximately 30 km/h (20
mph).

Each of these actions will cancel
cruise control operation (the SET
indicator light in the instrument clus-
ter will go off), but it will not turn the
system off. If you wish to resume
cruise control operation, move up the
lever (to RES+) located on your
steering wheel. You will return to your
previously preset speed.

OYDDDR3025

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments