manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 451 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 451

5 55

Driving your vehicle

✽

✽

NOTICE

• During normal cruise control

operation, when the SET switch is
activated or reactivated after
applying the brakes, the cruise
control will energize after approx-
imately 3 seconds. This delay is
normal.

• To activate cruise control, depress

the brake pedal at least once after
turning the ignition switch to the
ON position or starting the engine.
This is to check if the brake switch
which is important part to cancel
cruise control is in normal condi-
tion.

Cruise control switch

CRUISE : Turns cruise control sys-

tem on or off.

CANCEL: Cancels cruise control

operation.

RES+: Resumes or increases cruise

control speed.

SET-: Sets or decreases cruise con-

trol speed.

To set cruise control speed:

1. Press the CRUISE button on the

steering wheel, to turn the system
on. The CRUISE indicator light in
the instrument cluster will illumi-
nate.

2. Accelerate to the desired speed,

which must be more than 30 km/h
(20 mph).

✽

✽

NOTICE - 

Manual transaxle

For manual transaxle vehicles, you
should depress the brake pedal at
least once to set the cruise control
after starting the engine.

OYDDDR3027

OYDEDR3022

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments