manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 441 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 441

5 45

Driving your vehicle

✽

✽

NOTICE

When you jump start your vehicle
because of a drained battery, the
engine may not run as smoothly and
the ABS warning light may turn on at
the same time. This happens because
of low battery voltage. It does not
mean your ABS has malfunctioned.
• Do not pump your brakes!
• Have the battery recharged before

driving the vehicle.

Electronic Stability Control
(ESC) (If equipped)

The Electronic Stability Control
(ESC) system is designed to stabi-
lize the vehicle during cornering
manoeuvres. ESC checks where you
are steering and where the vehicle is
actually going. ESC applies the
brakes on individual wheels and
intervenes with the engine manage-
ment system to stabilize the vehicle.

CAUTION

• When you drive on a road hav-

ing poor traction, such as an
icy road, and have operated
your brakes continuously, the
ABS will be active continuous-
ly and the ABS warning light
may illuminate. Pull your vehi-
cle over to a safe place and
stop the engine.

• Restart the engine. If the ABS

warning light goes off, then
your ABS system is normal.
Otherwise, you may have a
problem with the ABS. We rec-
ommend that you contact an
authorised Kia dealer.

OYD056066R

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments