manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 419 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 419

5 23

Driving your vehicle

R (Reverse)

Use this position to drive the vehicle
backward.

N (Neutral)

The wheels and transaxle are not
engaged. The vehicle will roll freely
even on the slightest incline unless
the parking brake or service brakes
are applied.

- Parking in N (Neutral) gear
Follow below steps when parking
and you want the vehicle to move
when pushed.
1.After parking your vehicle, step on

the brake pedal and move the shift
lever to [P] with the ignition button in
[ON] or whilst the engine is running.

2.If the parking brake is applied

unlock the parking brake.

3.Whilst pressing the brake pedal,

turn the ignition button [OFF].
- For smart key equipped vehicles,

the ignition switch can be moved
to [OFF] only when the shift lever
is in [P].

4.Change the gear shift lever to [N]

(Neutral) whilst pressing the brake
pedal and pushing [SHIFT LOCK
RELEASE] button or inserting,
pressing down a tool (e.g. flathead
screw-driver) into the [SHIFT LOCK
RELEASE] access hole at the same
time. Then, the vehicle will move
when external force is applied.

CAUTION

The transaxle may be damaged
if you shift into P (Park) whilst
the vehicle is in motion.

CAUTION

Always come to a complete stop
before shifting into or out of R
(Reverse); you may damage the
transaxle if you shift into R
whilst the vehicle is in motion,
except as explained in “Rocking
the vehicle” in this section.

WARNING 

Do not drive with the shift lever
in N (Neutral).
The engine brake will not work
and lead to an accident.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments