manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 418 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 418

Driving your vehicle

22

5

For smooth operation, depress the
brake pedal when shifting from N
(Neutral) to a forward or reverse gear.

Transaxle ranges

The indicator in the instrument clus-
ter displays the shift lever position
when the ignition switch is in the ON
position.

P (Park)

Always come to a complete stop
before shifting into P (Park). This
position locks the transaxle and pre-
vents the front wheels from rotating.

WARNING

- Automatic

transaxle

• Always check the surrounding

areas near your vehicle for
people, especially children,
before shifting a car into D
(Drive) or R (Reverse).

• Before leaving the driver’s

seat, always make sure the
shift lever is in the P (Park)
position; then set the parking
brake fully and shut the engine
off. Unexpected and sudden
vehicle movement can occur if
these precautions are not fol-
lowed in the order identified.

• Do not use the engine brake

(shifting from a high gear to
lower gear) rapidly on slip-
pery roads.
The vehicle may slip causing
an accident.

CAUTION

• To avoid damage to your

transaxle, do not accelerate
the engine in R (Reverse) or
any forward gear position with
the brakes on.

• When stopped on an incline,

do not hold the vehicle sta-
tionary with engine power.
Use the service brake or the
parking brake.

• Do not shift from N (Neutral)

or P (Park) into D (Drive), or R
(Reverse) when the engine is
above idle speed.

WARNING 

• Shifting into P (Park) whilst

the vehicle is in motion will
cause the drive wheels to lock
which will cause you to lose
control of the vehicle.

• Do not use the P (Park) posi-

tion in place of the parking
brake. Always make sure the
shift lever is latched in the P
(Park) position and set the
parking brake fully.

• Never leave a child unattend-

ed in a vehicle.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments