manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 408 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 408

Driving your vehicle

12

5

ON

With manual transaxle

Press the engine start/stop button
when the button is in the ACC position
without depressing the clutch pedal.

With automatic transaxle / dual clutch
transmission

Press the engine start/stop button
whilst it is in the ACC position without
depressing the brake pedal.

The warning lights can be checked
before the engine is started. Do not
leave the engine start/stop button in
the ON position for a long time. The
battery may discharge, because the
engine is not running.

START/RUN

With manual transaxle

To start the engine, depress the clutch
pedal and brake pedal, then press the
engine start/stop button with the shift
lever in the N (Neutral) position.

With automatic transaxle / dual clutch
transmission

To start the engine, depress the brake
pedal and press the engine start/stop
button with the shift lever in the P
(Park) or the N (Neutral) position. For
your safety, start the engine with the
shift lever in the P (Park) position.

✽

✽  

NOTICE

If you press the engine start/stop
button without depressing the clutch
pedal for manual transaxle vehicles
or without depressing the brake
pedal for automatic transaxle / dual
clutch transmission vehicles, the
engine will not start and the engine
start/stop button changes as follow:
OFF

➔

➔

ACC 

➔

➔

ON 

➔

➔

OFF or ACC

✽

✽  

NOTICE

If you leave the engine start/stop
button in the ACC or ON position
for a long time, the battery will dis-
charge. 

Green

Not illuminated 

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments