manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 401 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 401

5 5

Driving your vehicle

WARNING

- 

Driving under

the influence of alcohol or
drugs

Drinking and driving is danger-
ous. Drunk driving is the num-
ber one contributor to the high-
way death toll each year. Even a
small amount of alcohol will
affect your reflexes, percep-
tions and judgement.
Driving whilst under the influ-
ence of drugs is as dangerous
or more dangerous than driving
drunk.
You are much more likely to
have a serious accident if you
drink or take drugs and drive.
If you are drinking or taking
drugs, don’t drive. Do not ride
with a driver who has been drink-
ing or taking drugs. Choose a
designated driver or call a cab.

WARNING

• When you intend to park or

stop the vehicle with the
engine on, be careful not to
depress the accelerator pedal
for a long period of time. It may
overheat the engine or exhaust
system and cause fire.

• When you make a sudden stop

or turn the steering wheel rap-
idly, loose objects may drop
on the floor and it could inter-
fere with the operation of the
foot pedals, possibly causing
an accident. Keep all things in
the vehicle safely stored.

• If you do not focus on driving,

it may cause an accident. Be
careful when operating what
may disturb driving such as
audio or heater. It is the
responsibility of the driver to
always drive safely.

WARNING

Always check the surrounding
areas near your vehicle for peo-
ple, especially children, before
putting a vehicle into D (Drive)
or R (Reverse).

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments