manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 390 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 390

Features of your vehicle

4 294

FCC 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi-
dential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or tel-
evision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to cor-
rect the interference by one or more of the following measures :

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void 
your authority to operate this equipment.

Declaration of Conformity

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments