manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 387 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 387

Features of your vehicle

291

4

Viewing Paired Phone List

This feature is used to view mobile
phones that have been paired with
the audio system. Upon selecting a
paired phone, the setup menu is dis-
played.
For more information, refer to the
“Setting 

Bluetooth

®

Wireless Technology

Connection” section within 

Bluetooth

®

Wireless Technology.
(1) Moves to the previous screen.
(2) Connect/disconnects currently

selected phone.

(3) Deletes the currently selected

phone.

(4) Sets currently selected phone to

highest connection priority.

✽

✽

NOTICE - 

Before
Downloading
Contacts

• To learn more about whether your

mobile phone supports contacts
downloads, refer to your mobile
phone user’s manual.

• The contacts for only the connect-

ed phone can be downloaded.

Downloading Contacts

As the contacts are downloaded
from the mobile phone, downloading
contacts number is displayed.
• Up to 1,000 contacts entries can

be copied into car contacts.

• Up to 1,000 contacts entries can

be saved for each paired device.

• Upon downloading contacts data,

previously saved contacts data will
be deleted. However, contacts
entries saved to other paired
phones are not deleted.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments