manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 366 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 366

Features of your vehicle

4 270

✽

✽

NOTICE 

• Up to 1,000 contacts entries can be

copied into car contacts. 

• Upon downloading contacts data,

previously saved contacts data will
be deleted. 

• Downloading is not possible if the

contacts download feature is
turned off within the Bluetooth

®

Wireless Technology device. Also,
some devices may require device
authorization upon attempting to
download. If downloading cannot
be normally conducted, check the
Bluetooth

®

Wireless Technology

device setting or the screen state. 

• Caller ID information will not be

displayed for unsaved callers. 

• The download feature may not be

supported in some mobile phones.
Check to see that the Bluetooth

®

Wireless Technology device sup-
ports the download feature.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments