Kia Cerato Owner'S Manual Download Page 365

Page: 365 / 655

Features of your vehicle

269

During a Handsfree Call

• Caller : Displays the other party’s

name if the incoming caller is
saved within your contacts.

• Incoming Number : Displays the

incoming number.

• Call time : Displays the call time.
• End : Ends call.
• Private : Converts to Private mode.
• Out Vol. : Sets call volume as heard

by the other party.

• Mute : Turns Mic Mute On/Off.

✽

NOTICE

If the mic is muted, the other party
will not be able to hear your voice.

Call History

A list of incoming, outgoing and
missed calls is displayed.
Press the [Download] button to
download the call history.
• Call History :

- Displays recent calls (call histo-

ry).

- Connects call upon selection.

• Download : Download Recent Call

History.

Contacts

The list of saved phone book entries
is displayed. Press the [Download]
button to download the call history.
• Contacts List :

- Displays downloaded contacts

entries.

- Connects call upon selection.

• Download : Download contacts

entries.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato

Reviews:

Kia Cerato, Owner'S Manual, Page: 365 / 655

Search results

Summary of Contents for Cerato

Reviews: