manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 36 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 36

Safety features of your vehicle

18

3

To fold down the rear seatback:

• 4 door, 2 door
1. Make sure the rear seat belt web-

bing is in the guide to prevent the
seat belt from being damaged.

2. Set the front seatback to the

upright position and if necessary,
slide the front seat forward.

3. Lower the rear headrests to the

lowest position.

4. Pull out the seatback locking

knob(1) in the trunk, then fold the
seat toward the front of the vehicle.

5. To use the rear seat, lift and pull

the seatback backward. Pull the
seatback firmly until it clicks into
place. Make sure the seatback is
locked in place.

OYDDSA2017

OYDDSA2015

OYD036003L

OYDDSA2018

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments