manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 332 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 332

Features of your vehicle

4 236

Radio Mode
(Type B-1, Type B-2)

Radio Mode Display Controls

(1) Mode Display

Displays currently operating mode.

(2) Frequency

Displays the current frequency.

(3) Preset

Displays current preset number [1] ~
[6].

(4) Preset Display

Displays saved presets.

(5) Auto store

Automatically saves frequencies with
superior reception to Preset buttons.

(6) RDS Menu

Displays the RDS Menu.

(7) RDS Info

Displays RDS broadcast information.

With the Radio Mode Button

Pressing the [RADIO] button will
change the operating mode in order
of FM1 

➟

FM2 

➟

FMA 

➟

AM 

➟

AMA.
If [Pop-up Mode] is turned on within
[SETUP]

[Display], then pressing

the  [RADIO] button will display the
Radio Pop-up Mode screen.
Turn the TUNE knob to move the
focus. Press the knob to select.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments