Kia Cerato Owner'S Manual Download Page 33 | Manualshive

Page: 33 / 655

Kia Cerato Owner'S Manual Download Page 33

3 15

Safety features of your vehicle

Seatback pocket (if equipped)

The seatback pocket is provided on
the back of the front passenger’s
seatback.

Rear seat adjustment

Headrest (if equipped)

The rear seat(s) is equipped with
headrests in all the seating positions
for the occupant's safety and comfort.
The headrest not only provides com-
fort for passengers, but also helps
protect the head and neck in the
event of a collision.

WARNING

-

Seatback
pockets

Do not put heavy or sharp
objects in the seatback pockets.
In an accident they could come
loose from the pocket and
injure vehicle occupants.

OYD036012

WARNING

Never attempt to adjust the seat
whilst the vehicle is moving or
when the passenger's seat is
occupied as the seat may sud-
denly move and injure the pas-
senger.

OMDI033062

«
...
31
32
33
34
35
...
»

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments