manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 323 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 323

Features of your vehicle

227

4

MP3 File Information

• Supported Audio Formats

❈

File formats that do not comply
with the above formats may not be
properly recognized or play with-
out properly displaying file names
or other information.

• Support for Compressed Files
1. Supported Bitrates (Kbps)

2. Sampling Frequencies (Hz)

• For MP3/WMA compression files,

differences in sound quality will
occur depending on the bitrate.
(Higher sound quality can be expe-
rienced with higher bitrates.)

• This device only recognizes files

with MP3/WMA extensions. Other
file extensions may not be properly
recognized.

3. Maximum number of recognized

folders and files

- Folder : 255 folders for CD, 2,000

folders for USB

- File : 999 files for CD, 6,000 files

for USB

❈

There are no limitations to the
number of recognized folder levels

MPEG1

MPEG2

MPEG2.5

WMA

44100

22050

11025

32000

48000

24000

12000

44100

3000

16000

8000

48000

MPEG1

MPEG2

MPEG2.5

WMA

Layer3

Layer3

Layer3

High Range

32

8

8

48

40

16

16

64

48

24

24

80

56

32

32

96

64

40

40

128

80

48

48

160

96

56

56

192

112

64

64

128

80

80

160

96

96

192

112

112

224

128

128

256

144

144

320

160

160

BIT RA

TE(kbps)

File System

ISO 9660 Level 1

ISO 9660 Level 2

Romeo/Juliet (128 characters)

Audio
Compression

MPEG1 Audio Layer3

MPEG2 Audio Layer3

MPEG2.5 Audio Layer3

Windows Media Audio Ver
7.X & 8.X

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments