manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 311 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 311

Features of your vehicle

215

4

With the Phone Button (if equipped)

Press the [SETUP]  button 

Select

[Phone]

Pair Phone

Select [Pair Phone]

➀

Search for device names as dis-
played on your mobile phone and
connect.

❈

SSP : Secure Simple Pairing

Non SSP supported device :

➁ 

After a few moments, a screen is

displayed where the passkey is
entered.

Enter the passkey “0000” to pair your
Bluetooth

®

Wireless Technology

device with the car audio system.

SSP supported device :

➁

After a few moments, a screen is
displayed 6 digits passkey.
Check the passkey on your
Bluetooth

®

Wireless Technology

device and confirm.

The device name and passkey will
be displayed on the screen for up to
3 minutes. If pairing is not completed
within the 3 minutes, the mobile
phone pairing process will automati-
cally be cancelled.

➂

Pairing completion is displayed.

In some mobile phones, pairing will
automatically be followed by connec-
tion.
It is possible to pair up to five
Bluetooth

®

Wireless Technology

enabled mobile phones.

CAUTION

To pair a Bluetooth

®

Wireless

Technology enabled mobile
phone, authentication and con-
nection processes are first
required. As a result, you can-
not pair your mobile phone
whilst driving the vehicle. First
park your vehicle before use.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments