manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 30 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 30

Safety features of your vehicle

12

3

Adjusting the height up and down

To raise the headrest, pull it up to the
desired position (1). To lower the
headrest, push and hold the release
button (2) on the headrest support
and lower the headrest to the desired
position (3).

Removal and installation

To remove the headrest:
1. Recline the seatback (2) with the

recline switch (1).

2. Raise headrest as far as it can go.

OYDDSA2009

WARNING

Make sure the headrest locks in
position after adjusting it for
proper protection of the occu-
pants.

OYFH034205

CAUTION

If you recline the seatback
towards the front with the head-
rest and seat cushion raised,
the headrest may come in con-
tact with the sunvisor or other
parts of the vehicle.

OYD034102R

■

Type B

■

Type A

OYD034100R

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments