manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 292 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 292

Features of your vehicle

4 196

✽

✽

NOTICE - 

Using the My Music

• Even if memory is available, a

maximum of 6,000 songs can be
stored.

• The same song can be copied up to

1,000 times.

• Memory info can be checked in

the System menu of Setup.

MENU : Bluetooth

®

Wireless

Technology Audio (if equipped)

If BT Audio is selected, 

Bluetooth

®

Wireless Technology audio will start
playing.
Audio may not automatically start
playing in some mobile phones.

Play/Pause : Press the TUNE knob
to play and pause the current song.
The previous song/next song/play
/pause functions may not be sup-
ported in some mobile phones.

WARNING- 

Distracted
Driving

Driving whilst distracted can
result in a loss of vehicle con-
trol that may lead to an acci-
dent, severe personal injury,
and death. The driver’s primary
responsibility is in the safe and
legal operation of a vehicle, and
use of any handheld devices,
other equipment, or vehicle sys-
tems which take the driver’s
eyes, attention and focus away
from the safe operation of a
vehicle or which are not permis-
sible by law should never be
used during operation of the
vehicle.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments