manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 285 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 285

Features of your vehicle

189

4

Radio Mode
(Type A-3, Type A-4)

With the Radio Mode Button

SEEK

Press the [SEEK TRACK] button
• Shortly pressing the button :

Changes the frequency.

• Pressing and holding the button :

Automatically searches for the next
frequency.

Preset SEEK

Press the [1] ~ [6] button
• Shortly pressing the button : Plays

the frequency saved in the corre-
sponding button.

• Pressing and holding the button :

Pressing and holding the desired
button from [1]  ~ [6] will save the
currently playing broadcast to the
selected button and sound a BEEP.

SCAN

Press the [SCAN] button
• Shortly pressing the button : The

broadcast frequency increases
and previews each broadcast for 5
seconds each. After scanning all
frequencies, returns and plays the
current broadcast frequency.

• Pressing and holding the button :

Previews the broadcasts saved in
Preset  [1]  ~ [6] for 5 seconds
each.

Selecting through manual search

Turn the TUNE  knob left/right to
adjust the frequency.

MENU : Radio

Within  [MENU] button is the AST
(Auto Store).

A.Store (Auto Store)  : 

[1] 

Button

Select A.Store (Auto Store) to save
frequencies with superior reception
to presets [1] ~ [6]. If no frequencies
are received, then the most recently
received frequency will be broad-
cast.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments