manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 252 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 252

Features of your vehicle

156

4

Sunvisor

Use the sunvisor to shield direct light
through the front or side windows.
To use the sunvisor, pull it downward.
To use the sunvisor for the side win-
dow, pull it downward, unsnap it from
the bracket (1) and swing it to the
side (2).
Adjust the sunvisor extension for-
ward or backward (3).
To use the vanity mirror, pull down the
visor and slide the mirror cover (4).
The ticket holder (5) is provided for
holding a tollgate ticket. (if equipped)

Power outlet

The power outlet is designed to pro-
vide power for mobile telephones or
other devices designed to operate
with vehicle electrical systems. The
devices should draw less than 15
amps with the engine running.

OXM049183R

CAUTION

- Vanity mirror

lamp (if equipped)

If you use the vanity mirror
lamp, turn off the lamp before
returning the sunvisor to its
original position, otherwise it
could result in battery dis-
charge and possible sunvisor
damage.

OYD046265R

OYD046045R

■

Type A

■

Type B

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments