manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 25 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 25

3 7

Safety features of your vehicle

Lumbar support 
(for driver’s seat, if equipped)

The lumbar support can be adjusted
by pressing the lumbar support
switch on the side of the seat.
1. Press the front portion of the

switch to increase support, or the
rear portion of the switch, to
decrease support.

2. Release the switch once it reach-

es the desired position.

Front seat adjustment - power 
(if equipped)

The front seat can be adjusted by
using the control switches located on
the outside of the seat cushion.
Before driving, adjust the seat to the
proper position so you can easily con-
trol the steering wheel, pedals and
switches on the instrument panel.

WARNING  

The power seat is operable with
the ignition OFF.
Therefore,

children should

never be left unattended in the
vehicle.

CAUTION

• The power seat is driven by an

electric motor. Stop operating
once the adjustment is com-
pleted. Excessive operation
may damage the electrical
equipment.

• When in operation, the power

seat consumes a large
amount of electrical power. To
prevent unnecessary charging
system drain, don’t adjust the
power seat longer than neces-
sary whilst the engine is not
running.

• Do not operate two or more

power seat control switches at
the same time. Doing so may
result in power seat motor or
electrical component malfunc-
tion.

OYD036002L/H

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments