manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 246 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 246

Features of your vehicle

150

4

Sunglass holder (if equipped)

To open the sunglass holder, press
the cover and the holder will slowly
open. Place your sunglasses with the
lenses facing out. To close the sun-
glass holder, push it up.

Luggage tray 
(5 door, if equipped)

You can place a first aid kit, a reflec-
tor triangle, tools, etc. in the box for
easy access.
Grasp the strap on the top of the
cover and lift it.

WARNING

• Do not keep objects except

sunglasses inside the sun-
glass holder. Such objects
can be thrown from the holder
in the event of a sudden stop
or an accident, possibly injur-
ing the passengers in the
vehicle.

• Do not open the sunglass

holder whilst the vehicle is
moving. The rear view mirror
of the vehicle can be blocked
by an opened sunglass holder.

• Do not put the glasses forcibly

into a sunglass holder to pre-
vent breakage or deformation
of glasses. It may cause per-
sonal injury if you try to open
it forcibly when the glasses
are jammed in holder.

OYDDCO2052

OYDDCO3238

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments