manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 237 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 237

4 141

Features of your vehicle

Air conditioning

Press the A/C button to turn the air
conditioning system on (indicator
light will illuminate).
Press the button again to turn the air
conditioning system off.

OFF mode

Press OFF button to turn off the air
climate control system. However, you
can still operate the mode and air
intake buttons as long as the ignition
switch is in the ON position.

Climate control air filter 

The climate control air filter installed
behind the glove box filters the dust
or other pollutants that come into the
vehicle from the outside through the
heating and air conditioning system.
If dust or other pollutants accumulate
in the filter over a period of time, the
air flow from the air vents may
decrease, resulting in moisture accu-
mulation on the inside of the wind-
screen even when the outside (fresh)
air position is selected. If this hap-
pens, we recommend that the cli-
mate control air filter be replaced by
an authorised Kia dealer.

OYDDCL2022

OYD046031L

OHM048209

Outside air

Recirculated

air

Climate control

air filter

Blower

Evaporator

core

Heater core

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments