manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 235 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 235

4 139

Features of your vehicle

Adjusting the driver and passenger
side temperature individually

• Press the “SYNC” button again to

adjust the driver and passenger
side temperature individually. The
illumination of button turns off.

• Operate the driver side tempera-

ture control knob to adjust the driv-
er side temperature.

• Operate the passenger side tem-

perature control knob to adjust the
passenger side temperature.

Air intake control

This is used to select the outside
(fresh) air position or recirculated air
position.
To change the air intake control posi-
tion, push the control button.

Recirculated air position

With the recirculated air
position selected, air
from the passenger
compartment will be
drawn through the heat-
ing system and heated
or cooled according to
the function selected.

Outside (fresh) air position

With the outside (fresh)
air position selected, air
enters the vehicle from
outside and is heated or
cooled according to the
function selected.

OYD046029L

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments