manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 234 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 234

Features of your vehicle

138

4

Instrument panel vents

The outlet vents can be opened or
closed separately using the thumb-
wheel.
Also, you can adjust the direction of
air delivery from these vents using
the vent control lever as shown.

Temperature control

The temperature will increase to the
maximum (HI) by turning the knob to
the extreme right.
The temperature will decrease to the
minimum (Lo) by turning the knob to
the extreme left.
When turning the knob, the tempera-
ture will increase or decrease by
0.5°C/1°F. When set to the lowest
temperature setting, the air condi-
tioning will operate continuously.

Adjusting the driver and passenger
side temperature equally

• Press the “SYNC” button to adjust

the driver and passenger side tem-
perature equally.
The passenger side temperature
will be set to the same temperature
as the driver side temperature.

• Turn the driver side temperature

control knob. The driver and pas-
senger side temperature will be
adjusted equally.

OYD046028L

OYD046025L

■

Driver’s side

■

Passenger’s side

OYDDCL2006R

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments